KLIM KRIOS PRO: The Ultimate Revolution in Trail Motorcycle Helmets – A Comprehensive Review
June 27, 2025
The world of adventure and trail motorcycling demands equipment that not only protects but also offers comfort, versatility, and performance in the most demanding conditions. In this category, the helmet is undoubtedly the most critical piece. For years, trail riders have sought the perfect balance between lightness, ventilation, safety, and the ability to adapt to both asphalt and the most intricate paths. It is in this context that the KLIM KRIOS PRO not only comes into play, but completely redefines what a high-end adventure helmet can and should be.
From its inception, KLIM, a brand renowned for its commitment to engineering and innovation in off-road and adventure motorcycle equipment, set out to create a helmet that would exceed expectations. The KRIOS PRO is not a simple evolution; it's a statement of intent, an amalgamation of cutting-edge technology, functional design, and a deep understanding of the needs of the modern adventurer. Its arrival on the market marked a turning point, introducing materials and construction techniques that, until then, were uncommon or even nonexistent in the trail helmet segment.
This article aims to unravel every layer of the KLIM KRIOS PRO. From its revolutionary carbon fiber construction to the integration of the Koroyd® system, we'll explore how every detail has been meticulously designed to deliver an unprecedented riding experience. We'll analyze its performance in diverse conditions, its versatility, comfort features, the safety standards it meets, and ultimately, why it has earned a place in the arsenals of the most demanding adventure riders around the world.
Get ready to dive into a complete dissection of the KLIM KRIOS PRO, a helmet that not only promises to protect, but also transforms every ride into a safer, more comfortable, and more exciting adventure.
I. Architecture and Materials: The Science Behind Lightweight Protection
The essence of the KLIM KRIOS PRO lies in its construction, which combines advanced materials and cutting-edge engineering techniques to achieve superior protection at an exceptionally low weight. This section delves into the key components that make the KRIOS PRO such a formidable helmet.
A. Full Carbon Fiber Shell
Carbon fiber is the material chosen for the KRIOS PRO's outer shell, and it's no coincidence. Known for its astonishing strength-to-weight ratio, carbon fiber creates an incredibly robust structure that can withstand significant impacts while keeping the helmet's weight to a minimum.
KLIM-Specific Manufacturing Process: KLIM doesn't use just any type of carbon fiber. The KRIOS PRO employs a carbon fiber weaving process fully optimized for helmet manufacturing. This means the carbon layers are oriented and layered in a way that maximizes strength at critical points, distributing impact energy efficiently across the entire shell surface. This process is manual, ensuring meticulous quality control at every stage.
Drastic Weight Reduction: The most immediate benefit of carbon fiber is weight reduction. The KRIOS PRO is one of the lightest adventure helmets on the market. A lighter helmet reduces neck and shoulder fatigue, especially on long rides or in off-road conditions where the head is constantly moving. This significantly improves rider comfort and their ability to maintain concentration.
Strength and Rigidity: Despite its lightness, the carbon shell offers exceptional rigidity. In the event of an impact, this rigidity helps prevent excessive deformation of the helmet, maintaining structural integrity and protecting the brain from crushing injuries. Carbon fiber effectively absorbs and dissipates energy, minimizing the amount of force transferred to the rider's head.
Aesthetics and Finish: In addition to its functional properties, carbon fiber gives the KRIOS PRO a premium aesthetic. The carbon weave pattern is visible in many of its variations, offering a modern, high-tech finish that many riders appreciate.
B. The Koroyd® System: Next-Generation Energy Absorption
What truly sets the KRIOS PRO apart from most helmets on the market is the incorporation of the Koroyd® system. This is a key component of its impact absorption system and represents a significant innovation in helmet safety.
What is Koroyd®? Koroyd® is a patented material composed of thousands of tiny extruded polymer tubes heat-welded together to create a unique cellular structure. This structure resembles a honeycomb, but on a microscale. The tubes are designed to deform in a controlled and homogeneous manner under impact.
Superior Energy Absorption: Upon impact, Koroyd® tubes collapse predictably, absorbing significantly more kinetic energy than traditional EPS (Expanded Polystyrene) materials. This absorption is more linear and gradual, helping to reduce impact forces transmitted to the head, especially in high-speed impacts.
Protection Against Oblique and Direct Impacts: The Koroyd® design offers exceptional protection against both direct (linear) and oblique (rotational) impacts. When crushed, the tubes minimize energy transmission, while their structure helps manage rotational forces.
Integrated Ventilation: One of the great advantages of Koroyd® is its porous nature. Unlike solid EPS, the Koroyd® structure allows for constant airflow through its channels. This directly contributes to the KRIOS PRO's exceptional ventilation, keeping the rider's head cool without compromising safety.
Ultralight: Like carbon fiber, Koroyd® is extremely lightweight. Its use complements the carbon shell, helping to make the KRIOS PRO a lightweight helmet, which in turn improves comfort and reduces fatigue.
Difference with the Original KRIOS: It's important to note that the main difference between the "non-PRO" KLIM KRIOS and the KRIOS PRO is precisely the integration of Koroyd®. While the original KRIOS was already a lightweight carbon fiber helmet, the addition of Koroyd® in the PRO version elevates it to a new level of safety and impact absorption, justifying the "PRO" designation.
C. FID-LOCK® Closing System
The KRIOS PRO incorporates a FID-LOCK® type strap closure system, a modern and highly functional alternative to the traditional double D or micrometric closures.
Magnetic Mechanism: FID-LOCK® uses a magnetically assisted system that allows for one-handed chin strap closure and opening, even when wearing gloves. Magnets guide the two parts of the closure together until they mechanically snap securely together.
Speed and Convenience: The main advantage is its speed and ease of use. Putting on and taking off the helmet is a much smoother process, which is especially appreciated by adventure riders who may need to make frequent stops.
Security and Reliability: Despite its ease of use, the FID-LOCK® system is incredibly secure and has been tested in high-performance environments. Once closed, it provides a firm and reliable hold, comparable to that of a double-D lock in terms of security.
Precise Fit: Although the closure is magnetic, it allows precise adjustment of the strap tension to ensure an optimal fit and prevent unwanted movement of the helmet.
The combination of a carbon fiber shell, the innovative Koroyd® system, and the practical FID-LOCK® closure not only places the KLIM KRIOS PRO at the forefront of helmet technology, but also makes it an unrivaled choice for those seeking maximum protection with minimal compromise in terms of weight and comfort.
II. Ventilation and Airflow: Keeping Your Head Cool Under Pressure
Ventilation is a critical aspect of any motorcycle helmet, but it takes on even greater importance in the trail and adventure segment. Trail riders often face extreme conditions: high temperatures, intense physical exertion, and the need to maintain mental clarity. The KLIM KRIOS PRO has been designed with a high-performance ventilation system to meet these demands.
A. Optimized Airflow Design
KLIM has left nothing to chance when designing the KRIOS PRO's ventilation system. Each air inlet and outlet has been carefully positioned and sized to maximize airflow through the helmet, even at low speeds.
Multiple Intake Ports: The KRIOS PRO features strategically placed, large air intakes:
Chin Vent: This is the main air intake and is generously sized. It's designed to direct a significant volume of fresh air toward the mouth and nose, which is crucial for breathing and to prevent the visor from fogging, especially during off-road exercise. It's usually adjustable to control the flow.
Top Vents: Located on the top of the shell, these intakes capture air flowing over the helmet. This air is channeled through the inner shell to cool the top of the head and dissipate accumulated heat. These vents are often also adjustable.
Internal Channeling (EPS Channeling): Once air enters through the front and top vents, it doesn't stagnate. The interior of the helmet, specifically the Koroyd® layer and EPS, are designed with channels and perforations that efficiently direct airflow around the rider's head. This channeling ensures that fresh air reaches all areas, promoting effective heat and moisture evacuation.
Rear Exhaust Vents: The system is completed with rear exhaust ports, usually located at the rear-bottom of the helmet. These extractors create a Venturi effect, drawing hot, stale air from the inside of the helmet to the outside. This constant flow is essential for maintaining a cool, dry interior environment.
B. The Role of Koroyd® in Ventilation
As mentioned above, the Koroyd® system is not only critical for safety, but also plays an integral role in the ventilation performance of the KRIOS PRO.
Open Structure: The "honeycomb" nature of Koroyd® means it's an inherently open and porous material. Unlike solid EPS, which requires the creation of specific channels, Koroyd® allows air to flow freely through its thousands of tubes.
Heat and Moisture Dissipation: This open structure facilitates much more efficient heat and moisture dissipation. Air can circulate directly around the head, carrying away accumulated sweat and body heat. This is crucial for maintaining comfort in hot climates and during physically demanding activities.
No Compromise on Safety: What's most impressive is that this ventilation capability doesn't compromise safety. Koroyd® tubes are still able to collapse and effectively absorb impact energy, even with air passing through. It's a true synergy between protection and thermal comfort.
C. Anti-Fog Visor System and its Contribution to Airflow
The KRIOS PRO's visor system also contributes to airflow management and fog prevention.
Pinlock®-Ready or Included: Most KRIOS PRO helmets are Pinlock®-Ready or include a Pinlock® 120 lens (the most effective on the market). Pinlock® creates a sealed air chamber between the main visor and a second internal lens, preventing fogging from forming on the visor surface due to differences in temperature and humidity.
Visor Opening Positions: The visor mechanism allows for several opening positions. A slight opening ("city" or "anti-fog") is particularly useful for allowing a small amount of air to enter just above the eyes, helping to clear any residual fogging and maintain additional airflow without having to fully open the visor.
The combination of an optimized aerodynamic design, the inherent ventilation of the Koroyd®, and a well-thought-out visor system ensures that the KLIM KRIOS PRO keeps the rider's head cool and comfortable, even in the most challenging conditions, resulting in greater concentration and safety while riding. This attention to detail in airflow management is a testament to KLIM's commitment to the overall user experience.
III. Versatility and Functionality: A Helmet for Every Adventure
One of the most attractive features of the KLIM KRIOS PRO, and adventure helmets in general, is its ability to adapt to different riding scenarios. The KRIOS PRO takes this versatility to the next level, allowing riders to configure the helmet to the specific needs of their ride.
A. Multi-Mode Configuration
The KRIOS PRO is designed as a 3-in-1 helmet, offering the ability to quickly switch between different configurations without the need for tools. This flexibility is essential for the modern adventure rider who can go from paved road to off-road trail in a matter of minutes.
Adventure Mode (Visor + Peak): This is the default and most popular configuration for trail riding. It combines the clear visor (for protection against wind, dust, and insects) with the aerodynamic peak (for protection from low-lying sun, branches, and projectiles, as well as giving it the characteristic trail look). This is the ideal configuration for most adventure trips, offering a balance between protection and off-road functionality.
Street Mode (Visor Only): By removing the peak without tools, the KRIOS PRO transforms into a sleek, aerodynamic road helmet. This configuration is perfect for long road trips, where the peak could create wind resistance or turbulence at high speeds. The improved aerodynamics reduce noise and neck fatigue.
Off-Road Mode (MX Goggles Only): For purely off-road riding where maximum peripheral vision and ventilation are required, the clear visor can be removed and motocross (MX) goggles can be worn with the peak installed. This configuration provides unmatched ventilation and unrestricted vision, ideal for enduro, technical trail, or motocross. The KRIOS PRO's wide field of view is optimized to accommodate most modern MX goggles.
B. Tool-less Visor and Peak Mechanism
The key to the KRIOS PRO's versatility lies in its quick-release mechanism. KLIM has invested in an intuitive and robust system that allows the rider to adjust the helmet on the fly.
Peak (Visor Peak): The peak is secured with quick-release fasteners. Simply twist or push to release or secure it. This can be done with gloves and in a matter of seconds, without the need for additional tools.
Visor (Face Shield): The visor mechanism is also quick-release. With a simple movement or push, the visor detaches from the sides. This makes it easy to clean, replace, or switch to off-road configuration.
Aluminum Screws: KLIM uses machined aluminum screws in the peak mechanism to ensure durability and smooth operation, while contributing to the helmet's low overall weight.
C. Aerodynamic Optimization of the Peak and Visor
The peaks on adventure helmets can often be a source of noise and turbulence at high speeds. KLIM has addressed this with meticulous design.
Reinforced Aerodynamic Peak: The KRIOS PRO's peak is not a simple extension; it's designed to be aerodynamic and to integrate with the shape of the shell. Its shape and incorporated vents are designed to reduce wind resistance and turbulence, even at highway speeds. Unlike some peaks that act like "sails" in crosswinds, the KRIOS PRO's minimizes this effect. It's constructed from lightweight yet durable materials to withstand impacts from branches or rocks.
KLIM SHIELD™ Anti-Scratch Optics and Pinlock® Ready: The KRIOS PRO's main visor uses KLIM SHIELD™ optical technology, which guarantees distortion-free vision. It's scratch-resistant to maintain clarity over time. Plus, as mentioned, it's Pinlock® compatible (often included), ensuring clear vision in wet and cold conditions by preventing fogging.
The KLIM KRIOS PRO's adaptability makes it a comprehensive solution for the adventure rider. Whether the journey involves long highway rides, winding mountain roads, or challenging off-road trails, the KRIOS PRO can be configured to deliver optimal performance and comfort in every situation, all with an ease and speed that sets it apart from its competitors.
IV. Comfort and Fit: Designed for the Tireless Traveler
Comfort is a decisive factor when choosing a helmet, especially for those who spend long hours on the bike. An uncomfortable helmet can lead to fatigue, distractions, and ultimately compromise safety. The KLIM KRIOS PRO has been meticulously designed to offer exceptional comfort and a precise fit, even during the most strenuous rides.
A. Ultralightness: The Impact of Reduced Weight
Although already mentioned, the KRIOS PRO's lightness is a key pillar of its comfort. An average adventure helmet can weigh between 1,500g and 1,800g. The KRIOS PRO, with its carbon fiber and Koroyd® construction, often weighs under 1,300g (depending on size and configuration, it can range from 1,200g to 1,250g in size M).
Dramatically Reduced Fatigue: Every gram counts on a long ride. A significantly lighter helmet reduces strain on the neck and shoulder muscles. This is especially noticeable on uneven terrain, where the head is constantly subjected to movement and vibration. Less fatigue translates into greater concentration and endurance.
Improved Maneuverability: A lighter helmet feels less "cumbersome" and allows for freer, more natural head movements, which is vital for peripheral vision and situational awareness.
B. Klimatek™ Interiors: Humidity Management and Anti-Odor
The helmet's inner lining is the first line of contact with the rider's skin, and its quality is essential for comfort and hygiene. KLIM has developed its own fabrics for this purpose.
Klimatek™ Fabric: The KRIOS PRO interiors are made with Klimatek™ fabric, an antimicrobial and moisture-wicking material.
Antimicrobial Properties: Helps prevent the growth of odor-causing bacteria and fungi, keeping the inside of the helmet fresh and more hygienic over time.
Moisture Wicking: Klimatek™ fabric is designed to quickly wick sweat away from the rider's skin, transporting it to the outer surface of the liner where it can evaporate. This helps keep the head dry and comfortable, even in hot weather or during exercise.
Fully Removable and Washable: For optimal hygiene, all components of the inner lining (cheek pads, upper lining, chin guard) are completely removable. This allows them to be washed regularly, prolonging the helmet's lifespan and maintaining a fresh, comfortable environment.
Anatomical Design: The interiors are pre-shaped to fit the anatomy of the head, providing a snug yet comfortable fit. The density of the foam and the shape of the cheek pads contribute to a secure fit that minimizes helmet movement at high speeds.
C. Acoustic Optimization: Wind Noise Reduction
Wind noise is a significant fatigue factor on long, high-speed rides. While a peaked adventure helmet will always be noisier than a full-face road helmet, KLIM has made considerable efforts to mitigate this issue in the KRIOS PRO.
Shell and Nosepiece Aerodynamics: The smooth, aerodynamic design of the carbon fiber shell, combined with the optimized nosepiece design, helps minimize turbulence and wind noise. The edges and seams are designed to be as fluid as possible.
Visor Seal: A good seal between the visor and the helmet shell is crucial for reducing wind buffeting. The KRIOS PRO features a visor mechanism that ensures a tight seal, blocking unwanted air from entering and reducing noise.
Internal Padding and Cheek Pads: The thickness and density of the internal padding and cheek pads also contribute to soundproofing. They help isolate the ear from outside noise, although the use of earplugs is still recommended for long trips.
D. Customizable Fit and Compatibility with Glasses and Communication Systems
KLIM has taken into account the variety of head shapes and additional needs of riders.
Size Availability and Additional Pads: The KRIOS PRO is available in a wide range of sizes. Additionally, cheek pads of varying thicknesses are often offered (sold separately) to allow for a more personalized and snug fit for every face shape.
Ready for Prescription Glasses: The design of the face opening and internal padding is designed to comfortably accommodate prescription glasses, without uncomfortable pressure points.
Communication System Compatibility: The KRIOS PRO is designed to easily integrate with most Bluetooth communication systems on the market. It features dedicated spaces for the headset and the main communication unit, making installation easy and ensuring that the components don't interfere with comfort or safety.
The sum of these details in the KLIM KRIOS PRO design results in a level of comfort that distinguishes it. Its lightness, interior climate management, noise reduction, and customization capabilities make this helmet a natural extension of the rider, allowing them to focus on the road or trail, without distractions or discomfort, even on the longest and most challenging expeditions.
V. Security: Protection Without Compromise
When it comes to a motorcycle helmet, safety is the most critical factor. The KLIM KRIOS PRO not only meets the most demanding safety standards, but goes further, incorporating innovative technologies to offer superior protection in the event of an impact. The combination of advanced materials and intelligent design makes it one of the safest helmets in its category.
A. Standard Security Certifications
The KRIOS PRO meets and often exceeds internationally recognized safety certifications.
ECE 22.05 (Europe): ECE 22.05 certification is a mandatory European standard that guarantees that the helmet has passed a rigorous series of impact, retention, and durability tests. It is a legal requirement for the sale of helmets in Europe and many other countries. The KRIOS PRO is fully certified under this standard.
DOT (United States): For the U.S. market, the KRIOS PRO also meets the DOT FMVSS 218 standard, which is the minimum safety requirement for motorcycle helmets in the United States. While often considered less stringent than ECE in some areas, the KRIOS PRO far exceeds its minimum requirements.
Prepared for Future ECE 22.06: Although the standard was 22.05 at the time of its main release, the KRIOS PRO's robust design and advanced technologies (especially Koroyd®) position it well to meet the more stringent requirements of the new ECE 22.06 certification, which includes more varied impact tests and rotational forces. It is important to check the specific version of the helmet for the most recent certification.
B. Koroyd®: The Cutting Edge in Shock Absorption
As already detailed, the Koroyd® system is the crown jewel of the KRIOS PRO's safety arsenal. Its role is fundamental in reducing the risk of brain injuries.
Linear and Oblique Impact Protection: Traditional EPS helmets are primarily designed to absorb linear impacts. However, in reality, most head impacts are oblique (angled), generating rotational forces that are dangerous to the brain. Koroyd® is designed to mitigate both types of forces.
Linear Impacts: Koroyd® tubes crush in a homogeneous and controlled manner, decelerating the impact more effectively and with lower force transmission than EPS, minimizing the risk of concussions and internal injuries.
Oblique Impacts: While not a dedicated rotational energy management system like MIPS (found in other helmets), Koroyd®’s ability to deform in multiple directions and its cellular structure help absorb and dissipate some of the rotational energy, reducing stress on the brain.
Lightness and Protection: The most notable feature is that it achieves this superior protection while keeping the helmet exceptionally light. Less weight on the head means less inertia in the event of an impact, which can help reduce the severity of injuries.
C. Carbon Fiber Shell: Structural Strength
The carbon fiber shell isn't just for lightness; it's the first point of defense and a crucial component in the helmet's safety strategy.
Energy Dispersion: In the event of an impact, the carbon fiber shell distributes the force of the impact over a larger surface area. This prevents the energy from concentrating in a single point and allows the inner layers (Koroyd® and EPS, if applicable) to absorb the remaining energy more effectively.
Penetration Resistance: Carbon fiber offers excellent resistance to penetration by sharp or pointed objects, a vital feature in accident situations where debris or environmental elements could impact the helmet.
Structural Integrity: Maintains the helmet's shape under considerable force, ensuring the internal absorption system functions as designed.
D. FID-LOCK® Retention System
Although it is a comfort element, the FID-LOCK® closure system is also an essential safety component.
Secure Hold: A retention system must keep the helmet firmly in place at all times, preventing it from shifting or becoming detached from the head during an accident. The KRIOS PRO's FID-LOCK® has been rigorously tested and performs this function flawlessly.
Ease of Use in Emergencies: The ability to open and close the helmet with one hand is also an advantage in emergency situations or when medical assistance is required, as the helmet can be removed more quickly and safely.
E. Optimized Design for Peripheral Vision
Active safety is also crucial. A clear and wide field of vision is essential for situational awareness and accident avoidance.
Wide Eye Port: The KRIOS PRO features a large eye port that provides an excellent peripheral field of vision, both horizontally and vertically. This is vital for seeing traffic, obstacles on the trail, and having a complete view of your surroundings.
Optically Correct Visor: The KLIM SHIELD™ visor is designed to be optically correct, meaning it doesn't distort your vision. Visual distortions, even slight ones, can cause eye fatigue and poor judgment on the road or trail.
MX Goggle Compatibility: The ability to use motocross goggles further expands the field of vision in off-road environments where dust protection and visual clarity are paramount.
In short, the safety of the KLIM KRIOS PRO isn't an added feature, but rather the core of its design. The integration of carbon fiber and the revolutionary Koroyd®, combined with high-level certifications and a design that prioritizes vision and retention, make this helmet a fortress on the rider's head, offering invaluable peace of mind on every ride.
VI. Design and Aesthetics: Form and Function in Harmony
The KLIM KRIOS PRO not only stands out for its performance and safety; it's also an aesthetically pleasing helmet that reflects its high-tech and adventure-oriented nature. Its design fuses functionality with a modern and aggressive aesthetic.
A. Aerodynamic Lines and Aggressive Profile
The KRIOS PRO features a distinctive profile that is immediately recognizable as a high-performance adventure helmet.
Sculpted Design: The lines of the shell are crisp and sculpted, contributing not only to its dynamic appearance but also to its aerodynamic performance. Every curve and edge is designed to guide airflow and reduce drag.
Modern Trail Aesthetics: Combines the ruggedness needed for off-roading with the elegance of a premium road helmet. The peak, while functional, blends visually into the shell, avoiding the appearance of an appendage.
Variety of Finishes and Graphics: KLIM offers the KRIOS PRO in a range of finishes, from the understated, exposed carbon (the most popular and one that highlights its construction) to solid colors and more striking graphics. Glossy or matte carbon finishes are especially popular, as they showcase the quality of the material. Graphics are typically subtle yet modern, often inspired by nature or technical design.
B. Coherent Integration of Components
One of the design achievements of the KRIOS PRO is how all its components, despite their versatility, integrate seamlessly and cohesively.
Peak and Visor: The peak and visor mechanism is designed to be discreet and efficient. The aluminum screws are a premium touch that doesn't look out of place. When the peak is removed for road mode, the transition is clean and the helmet still looks like a high-end full-face helmet.
Discreet but Functional Vents: The air intakes and exhausts are well integrated into the overall design of the helmet, without being overly bulky or disruptive to the aesthetics. They are clearly functional, yet blend with the lines of the shell.
Internal Sun Visor (not included on PRO): It’s important to note that the KRIOS PRO focuses on lightness and extreme ventilation, so it does not include a retractable internal sun visor . This is because an internal visor adds weight, complexity, and may slightly compromise ventilation or the integrity of the Koroyd®. This design decision prioritizes performance and low weight over an additional comfort feature, which many riders find difficult with sunglasses or an interchangeable tinted visor. For trail purists and those seeking maximum lightness, the absence of an internal sun visor is an acceptable compromise.
C. Quality and Finish Details
The attention to detail in the KRIOS PRO is evident in every element.
Closures and Hardware: All closures, such as the FID-LOCK® system, and hardware used are high-quality, designed to be durable and operate smoothly over time.
Gaskets and Seals: The visor and air intake seals are precise, which not only contributes to noise reduction and prevents water and dust from entering, but also reflects a high level of workmanship.
Interior Linings: Klimatek™ interiors are not only functional, but also well-made, with clean seams and a fit that demonstrates meticulous ergonomic study.
In short, the KLIM KRIOS PRO's design is an extension of its functionality. Every aesthetic element serves an aerodynamic, ventilation, or safety purpose. It's a helmet that not only feels good to wear but also displays the performance and quality it represents, cementing its status as a benchmark in the adventure helmet segment.
VII. Maintenance and Care: Preserving the Investment
The KLIM KRIOS PRO is a significant investment for any adventure rider. Proper maintenance will not only prolong its lifespan but also ensure it continues to provide the levels of protection and comfort for which it was designed.
A. Cleaning the Outer Shell
The KRIOS PRO's carbon fiber shell is durable but requires specific care to maintain its finish.
Recommended Materials: Use a soft microfiber cloth and warm water with a mild soap (such as hand soap without harsh detergents or baby shampoo). Avoid abrasive cleaners, solvents, glass cleaners, or gasoline, as these may damage the carbon fiber finish or varnish.
Cleaning Process:
Remove excess dirt or mud with running water (not pressurized).
Using the soft cloth and soap solution, gently clean the surface of the shell.
Rinse well with clean water to remove any soap residue.
Dry the helmet with another clean, soft cloth. Let it air dry completely in a well-ventilated area, away from direct sunlight or heat sources.
Insect and Tar Stains: For persistent insect or tar stains, there are specific helmet products that are safe for carbon fiber. Apply the product, let it sit for the indicated time, and then remove it with a soft cloth.
B. Visor and Pinlock® Care
The visor is crucial for vision and must be kept spotless.
Main Visor: Just like the shell, use a soft microfiber cloth and warm water with neutral soap. Wipe gently, rinse, and dry. Never rub the visor dry, as this could scratch it. If you have dried insects, first wet them with a damp cloth for a few minutes to soften them before attempting to remove them.
Pinlock® lens: The Pinlock® lens is very delicate.
Carefully remove it from the visor, holding it by the edges so as not to touch the inner surface.
Clean it only with warm water and a very soft cloth or cotton ball. Do not use soap or chemicals, and do not scrub vigorously, especially on the inside surface, as it has a special coating.
Let it air dry completely before reinstalling it on the visor.
If the Pinlock® visor is scratched or damaged, it is best to replace it, as its effectiveness will be compromised.
C. Klimatek™ Interior Cleaning
Keeping the interior clean is essential for hygiene and comfort.
Disassembly: Remove all components from the inner liner (cheek pads, upper liner, chin guard). Consult your owner's manual if you're unsure how to do this.
Washing:
Manual: Ideally, hand wash in warm water with a mild soap (baby shampoo or detergent specifically for delicate clothing). Gently massage the fabric to remove dirt and sweat.
Machine: If using a washing machine, use a delicate cycle, cold or warm water, and a mild detergent. Place the components in a laundry bag to protect them.
Drying: Do not use a dryer, as heat can damage foams and fabrics. Air dry, hanging or flat, in a shaded, well-ventilated area. Make sure they are completely dry before reinstalling to prevent mold growth.
Reinstallation: Reassemble the liner components according to the instructions, making sure everything fits together properly for a secure and comfortable fit.
D. Helmet Storage
Proper storage prolongs the life of the helmet.
Cool, Dry Place: Store your helmet in a cool, dry, and dark place when not in use. Avoid prolonged exposure to direct sunlight or extreme temperatures (very high or very low), as these can degrade the materials.
Carrying Bag: Use the cloth bag that usually comes with the helmet to protect it from dust and scratches.
Avoid Unstable Surfaces: Don't leave your helmet on the ground where it can be stepped on or hit. Avoid hanging it by the chin strap or hanging it from motorcycle mirrors, as this can deform the inner lining or shell.
E. Regular Inspection
Perform periodic visual inspections of the hull.
Shell: Look for cracks, deformations, or damage to the carbon fiber.
Visor: Check for deep scratches, cracks, or proper operation of the mechanism.
Retention System (FID-LOCK®): Make sure the closure system works properly, that the strap is not frayed, and that the magnetic and mechanical mechanisms close securely.
Interior: Check for excessive wear, deformation, or fraying of the fabric.
Peak: Check stability and whether it is securely fastened.
If the helmet suffers an impact (even if there's no visible damage), or if you notice significant cracks, deformations, or any compromise to its structure, it must be replaced. Impact-absorbing materials are designed to work only once.
By following these maintenance guidelines, your KLIM KRIOS PRO will accompany you on countless adventures, offering you the safety and comfort you expect from a helmet of its caliber.
VIII. Comparison with the Competition: Why Does the KRIOS PRO Stand Out?
In the competitive adventure helmet market, the KLIM KRIOS PRO faces a number of high-caliber rivals. To truly understand its value, it's essential to compare it to some of its main competitors and highlight its unique strengths.
The KLIM KRIOS PRO's main competitors tend to be other premium adventure helmets that seek a balance between off-road and road performance, lightness, and safety. Some of the most notable names include:
Arai XD-4 / Tour-X4: A classic benchmark in the segment, known for its build quality and safety.
Shoei Hornet X2 / ADV: Another heavyweight, appreciated for its comfort, ventilation and aerodynamics.
Touratech Aventuro Carbon / Carbon2: Helmets manufactured by adventure equipment brands, often with carbon shells and focused on performance.
AGV AX9: AGV's proposal for the trail segment, also versatile and with a carbon shell in some versions.
Schuberth E1: Known for its silence and comfort, as well as for being a modular adventure helmet.
Below is a comparison table and a more in-depth analysis of the advantages of the KRIOS PRO.
Full carbon fiber, manual. Extremely light and rigid.
Mostly fiber composites (fiberglass, carbon-fiberglass) or full carbon. Weight varies.
Shock Absorption System
Koroyd®: Revolutionary collapsible tube technology for superior absorption of linear and oblique impacts.
Dual- or multi-density EPS. Some may include rotational energy management systems (e.g., MIPS in the Aventuro).
Weight
One of the lightest on the market (approx. 1200-1250g in M). Significant reduction in fatigue.
Generally heavier (1500g - 1800g).
Ventilation
Excellent airflow thanks to Koroyd® and optimized inlet/outlet design. Very efficient.
Good to excellent, with internal channels. Koroyd® offers a unique advantage in direct flow.
Versatility
Tool-free 3-in-1 system: Visor+Peak, Visor Only, MX Goggle Only+Peak. Very quick and easy to change.
Usually 2 in 1 or 3 in 1 with screws/tools for some changes.
Internal Sun Visor
NOT INCLUDED. Prioritize lightness and safety with Koroyd®.
Frequently included (Shoei, Schuberth, AGV). Arai does not include it.
Closing System
Magnetic FID-LOCK®: Fast, secure and easy to use with gloves.
Double D (Arai, Shoei, Touratech) or micrometric (Schuberth, AGV).
Interior Comfort
Klimatek™ antimicrobial and moisture-wicking. Removable and washable. Very comfortable.
High-quality interiors, often removable and washable.
Aerodynamics of the Peak
Optimized design to reduce drag and turbulence at high speed.
Variable; some spikes may generate more noise or resistance at high speeds.
Price
High-end/Premium. Reflects the technology and materials used.
High-end, comparable or slightly lower prices, depending on the brand and features.
A. Weight Advantage: The King of Lightness
The most striking and noticeable feature of the KRIOS PRO is its extreme lightness. While other carbon helmets may be able to cut down on weight, the combination of the carbon shell with the inherent lightness of Koroyd® puts the KRIOS PRO in a class of its own.
Impact on Fatigue: A lighter weight has a direct and positive impact on neck and shoulder fatigue, especially on long rides or off-roading. This is something experienced riders greatly appreciate. Other helmets, while comfortable, can feel heavier after several hours of continuous use.
B. The Koroyd® Innovation: Next-Generation Safety
The Koroyd® system is the KRIOS PRO's key technological differentiator. None of its main competitors utilize this shock absorption technology the way KLIM does.
Superior Protection: Koroyd® offers superior and more consistent energy absorption than traditional EPS, especially across a wider range of impact speeds and with improved rotational energy management (although not a rotational-specific system like MIPS). This makes it one of the most advanced helmets in terms of passive safety.
Synergy with Ventilation: The integration of Koroyd® also allows for inherent ventilation that many other helmets can't match without compromising safety.
C. Versatility and Ease of Use Without Tools
The ability to switch between configurations quickly and without tools is a significant practical advantage.
Adaptability on the Move: Adventure riders often find themselves in situations where they need to quickly switch between the visor and goggles, or remove the peak. The KRIOS PRO's ability to make these changes on the fly, without searching for tools, makes it extremely convenient. Some competitors require more time or the use of tools for certain configurations.
D. Comfort and Premium Finish
Beyond its lightness, the KRIOS PRO offers a high level of comfort and premium finish quality.
Klimatek™ Interiors: The interiors are high-quality, soft, and effective in managing moisture and odor, contributing to a comfortable and cool experience.
Peak Aerodynamics: The KRIOS PRO's aerodynamic peak design is often praised for its ability to generate less drag and noise at high speed compared to some competitor peaks that can feel more like a "sail."
E. Commitments (and why they are not necessarily disadvantages)
The main "absence" in the KRIOS PRO is the internal sun visor.
Focus on Lightness and Safety: KLIM made the conscious decision to omit the internal sun visor to prioritize lightness, ventilation, and maximum Koroyd® integration. For many riders, the added lightness and safety outweigh the convenience of an internal sun visor, leading them to opt for sunglasses or an interchangeable tinted visor. This differentiates it from helmets like the Shoei Hornet X2 or the Schuberth E1, which do include one, but at the cost of greater weight.
In conclusion, the KLIM KRIOS PRO stands out from the competition not only because of its elite construction materials, but also because of the innovative integration of the Koroyd® system and its obsession with extreme lightness and tool-free functionality. While there are many excellent adventure helmets on the market, the KRIOS PRO stands as the leader for those seeking maximum protection, minimum weight, and uncomplicated versatility, all with exceptional design and comfort. Its price reflects its premium status and the technology it packs.
IX. User Experience and Field Performance: The Acid Test
Beyond the technical specifications and materials, the true measure of an adventure helmet lies in its real-world performance, in the hands (or rather, on the heads) of riders. The KLIM KRIOS PRO has been put through its paces by riders around the world, and its reviews and word of mouth have cemented it as a leader.
A. Road Performance (Asphalt and Highway)
Although it's an adventure helmet, most trail rides start and end on asphalt, and often include long stretches of highway.
Aerodynamics and High-Speed Stability: Despite having a peak, the KRIOS PRO handles high speeds surprisingly well. The aerodynamic design of the shell and peak minimizes wind resistance and turbulence. This reduces the "sail effect" that many adventure helmets can suffer from, resulting in less neck fatigue and a more stable, relaxed ride.
Wind Noise: Noise is a common concern with adventure helmets. While the KRIOS PRO isn't as quiet as a pure full-face road helmet (like a Shoei Neotec or Schuberth C5), it holds its own in its class. Aerodynamic improvements and a good visor seal contribute to an acceptable noise level, especially when compared to other peaked helmets. For long, high-speed rides, the use of earplugs is still recommended.
Visibility: The optically correct visor and wide field of vision provide excellent clarity and situational awareness in traffic and on road curves. The Pinlock system (if used) ensures clear vision in wet or cold conditions.
B. Off-Road Performance (Trails, Tracks, Enduro)
This is where the KRIOS PRO really shines, showing its off-road lineage.
Exceptional Ventilation: Ventilation is crucial when working physically off-road. The combination of the Koroyd® system and large air intakes provides a constant flow, keeping your head cool and reducing sweat buildup. This is a huge relief in hot weather or during technical sections.
Lightness on Uneven Terrain: Low weight is a huge advantage off-road. Head movements are constant and rapid, allowing riders to scan the terrain. A lightweight helmet minimizes inertia and neck strain, allowing the rider to focus on the line and react more quickly. Ground vibrations are also less transmitted to the neck.
Sun and Obstacle Protection: The peak provides excellent protection from low sun, glare, tree branches, dust, and front wheel projections.
MX Goggle Compatibility: Transitioning to off-road mode with motocross goggles is seamless, and the eye port is designed to accommodate most oversized goggles, offering an unrestricted field of view and maximum ventilation.
Off-Road Peak Stability: Unlike some helmets with flimsy peaks, the KRIOS PRO peak is sturdy and remains stable even on jumps or when going over bumps, without excessive vibration.
C. Comfort on Long Trips and Expeditions
Comfort over time is what defines a good adventure experience.
Interior Climate Management: The combination of Koroyd® ventilation and Klimatek™ linings keeps the rider's head dry and comfortable, avoiding the sticky, damp feeling that's vital to comfort on multi-day rides.
Fit and Pressure Points: The ergonomic design of the interior and the possibility of customization with different cheek pads ensure a snug fit without painful pressure points, even after 8-10 hours of use.
Easy On/Off: The FID-LOCK® system is a game-changer for many. The ease of putting on and taking off the helmet with one hand is a luxury during frequent stops or when you need a quick break.
D. Durability and Quality Construction
Users report high durability of the KRIOS PRO, something expected from a premium product.
Durable Finishes: The carbon fiber shell and finishes are resistant to minor scratches and general wear and tear from adventure use.
Robust Mechanisms: The visor and peak mechanisms are solid and maintain their smooth operation even after intensive use in dusty and muddy conditions.
Element Resistance: The helmet performs well in the rain, with good sealing to prevent water ingress, although it is always recommended to check the seals periodically.
In short, the user experience with the KLIM KRIOS PRO is overwhelmingly positive. Riders value its effortless adaptability to any environment, its fatigue-reducing lightness, its superior ventilation, and the peace of mind provided by its advanced safety system. It's not just a helmet; it's a trusted companion designed to maximize enjoyment and safety every mile of a motorcycle adventure.
X. The Design Process and Philosophy of KLIM
To fully understand the KLIM KRIOS PRO, it's helpful to examine the philosophy and design process of KLIM, the brand behind this helmet. KLIM is synonymous with high-performance adventure gear, and its approach is rooted in intensive engineering, research, and development.
A. "Engineered for the Ride" – Engineering First
KLIM's unofficial motto might be "Engineered for the Ride." Unlike some brands that focus primarily on aesthetics or marketing, KLIM prioritizes functionality, durability, and performance.
Focus on the Rider's Problem: KLIM doesn't design products in a vacuum. Its process begins by identifying riders' real-world problems and unmet needs. For the KRIOS PRO, this meant addressing the need for an adventure helmet that was exceptionally light, safe, and versatile, without compromising on ventilation or comfort.
Intensive Research and Development: The brand invests heavily in R&D. This includes rigorous laboratory testing, computer simulations, and, crucially, extreme field testing by ambassadors and professional pilots in some of the harshest conditions on the planet. Products don't go to market until they pass these exhaustive tests.
Collaboration with Experts: The integration of Koroyd® into the KRIOS PRO is a testament to KLIM's willingness to collaborate with external experts and embrace the latest technological innovations. They aren't afraid to incorporate cutting-edge solutions if they demonstrate a real benefit to the rider.
B. High Quality Materials and Components
KLIM is known for its relentless selection of the highest-quality materials. This is reflected in the KRIOS PRO.
Premium Carbon Fiber: They don't just use carbon fiber, but also an optimized hand-laminated process that ensures maximum strength and lightness. The attention to detail in the fiber weaving is palpable.
Koroyd®: The choice of Koroyd® underscores KLIM's commitment to safety beyond minimum standards. It's an expensive technology, but KLIM adopted it for its superior impact absorption and ventilation benefits.
Hardware Components: From the machined aluminum screws to the FID-LOCK® locking system, all components are chosen for their durability, lightness, and uncompromising functionality.
Inner Fabrics: The development of the Klimatek™ fabric itself demonstrates attention to detail even in the inner layers, which are crucial for comfort and hygiene.
C. Functional Design over Pure Aesthetics
While the KRIOS PRO is an attractive helmet, its design is driven by function. Every curve, every vent, and every feature has a purpose.
Pragmatic Aerodynamics: The aerodynamic design isn't just for show; it's engineered to reduce wind fatigue and noise, improving the driving experience.
Real-World Usability: Tool-free configuration changes, compatibility with MX goggles and communication systems, and a comfortable fit are all features that come from a deep understanding of how riders use their helmets in everyday life.
D. Rigorous Testing Process
Before a KRIOS PRO reaches the consumer, it has gone through an exhaustive testing cycle.
Laboratory Testing: These include impact, penetration, retention, and abrasion resistance tests to ensure the helmet meets and exceeds certification standards (ECE, DOT).
Extreme Terrain Testing: Beyond the lab, prototypes are tested under the harshest conditions by experienced riders in environments such as deserts, mountains, and hot and cold climates. This real-world feedback is crucial for refining the design and troubleshooting any issues before production.
KLIM's design philosophy for the KRIOS PRO is one of uncompromising engineering, with every decision made with the goal of maximizing performance, safety, and comfort for the adventure rider. This helmet is not designed for the masses, but for those who value innovation and superior quality in their equipment. This approach is what has allowed the KRIOS PRO to set a new benchmark in its category.
XI. Accessories and Personalization: Expanding the Capabilities of the KRIOS PRO
While the KLIM KRIOS PRO is a highly functional and versatile helmet out of the box, KLIM and the aftermarket offer options to further customize it to suit the rider's individual preferences and needs.
A. Interchangeable Visors
The visor is a crucial component for visibility and can be adapted to different lighting conditions.
Replacement Clear Visor: It's helpful to have a spare in case of scratches or damage.
Smoked/Tinted Visor: For bright sunlight conditions, a smoked visor offers glare protection without the need for additional sunglasses (if you don't want to wear glasses or if the internal sun visor on other helmets is missing on the Krios Pro).
Iridium/Mirrored Visor: These offer a distinctive aesthetic and also help reduce glare. They can be an excellent option for those seeking a more aggressive look. It's important to remember that tinted or mirrored visors are not suitable for night driving.
B. Pinlock® Lenses
The Pinlock lens is essential for driving in cold or wet climates.
Pinlock® 120 (Standard or Spare): The KRIOS PRO usually includes or is ready for Pinlock® 120, the higher-performance version. Having a spare is a good idea, as they are delicate and can scratch.
C. Spare Parts and Small Parts Kit
Small components can wear out or become lost over time.
Peak Screws: Although durable, the aluminum peak screws may need to be replaced if they become damaged or lost.
Visor Mechanisms: In case the quick release mechanisms become damaged, they can be purchased as replacements.
Visor Gaskets: The rubber gaskets around the visor can degrade over time and with use. Replacing them ensures a good seal and reduces noise and water ingress.
D. Cheek Pads and Inner Liners
For a more custom fit or to replace worn parts.
Different Thickness Cheek Pads: If the standard fit isn't perfect, KLIM offers cheek pads of different thicknesses (thinner or thicker) to fine-tune the fit in the cheek area, which can improve comfort and security.
Complete Set of Inner Liners: Over time, the inner lining can become compacted or worn. Replacing the entire set (cheek pads and upper liner) can rejuvenate the helmet and restore its original fit.
E. Bluetooth Communication Systems
The KRIOS PRO is designed for easy integration.
Headphone Slots: The interior of the helmet features dedicated cavities to house the speakers of Bluetooth communication systems, ensuring there are no uncomfortable pressure points.
Main Unit Location: There's adequate space to mount the main communication unit on the side of the helmet, ensuring it doesn't interfere with aerodynamics or the design. Most popular systems (Sena, Cardo, Midland) integrate seamlessly.
F. Action Camera Mounts
For riders who document their adventures.
Suitable Surface: The shape of the shell and the strength of the carbon fiber allow for secure attachment of action camera mounts (GoPro, Insta360, etc.) in various locations (top, side, chin), although caution is always recommended and securing the camera with an additional safety strap.
G. Bags and Carrying Cases
To protect the helmet when not in use.
Original Bag: The KRIOS PRO comes with a high-quality fabric bag to protect it from dust and scratches.
Padded Covers: For additional protection during transport or storage in luggage, there are specific padded covers for helmets that offer greater cushioning.
The availability of these accessories and the ease of customization extend the functionality and lifespan of the KLIM KRIOS PRO. They allow riders to tailor the helmet to their exact needs, whether to improve visibility in certain conditions, for a perfect fit, or to integrate additional technology, ensuring the KRIOS PRO remains a versatile, high-performance tool on all their adventures.
XII. Final Reflections and Conclusion: The KRIOS PRO as the Gold Standard
The KLIM KRIOS PRO isn't just another motorcycle helmet on the market; it's a bold statement of innovation, a testament to KLIM's commitment to cutting-edge engineering and a deep understanding of what the modern adventure rider truly needs. Throughout this extensive review, we've broken down its components, technologies, performance, and the philosophy that drives it, concluding that it has set a new gold standard in the trail helmet segment.
A. The Sum of its Innovations
What makes the KRIOS PRO exceptional is not a single feature, but the perfect synergy of multiple innovations:
Extreme Lightness: The full carbon fiber shell makes it one of the lightest helmets in its category, dramatically reducing neck fatigue on long, demanding rides, both on and off-road.
Revolutionary Safety with Koroyd®: The integration of the Koroyd® system elevates safety to a new level, offering superior impact absorption against linear and oblique forces that exceed the limits of traditional EPS. This is, without a doubt, its most defining feature and a key factor in rider peace of mind.
Effortless Versatility: Its ability to quickly transform between adventure, on-road, and off-road modes without tools, along with the efficient visor and peak system, makes it a one-stop solution for any type of ride.
Unwavering Comfort: From Klimatek™ fabrics that manage moisture and odor to its aerodynamic design that minimizes noise and turbulence, every aspect of the KRIOS PRO is designed to maximize comfort, even in the most extreme conditions and on the longest routes.
Attention to Detail: Every component, from the FID-LOCK® closure to the visor mechanisms, is designed with meticulous attention to detail to ensure durability, functionality, and a superior user experience.
B. Who is the KLIM KRIOS PRO for?
The KRIOS PRO isn't for everyone. Its price puts it at the high end of the market, making it a significant investment. It's the ideal helmet for:
Serious Adventure Riders: Those who take long trips, regularly alternate between on-road and off-road riding, and seek maximum performance, comfort, and safety.
Technology Lovers: Riders who appreciate advanced engineering and the incorporation of cutting-edge materials and systems.
Professionals and Demanding Users: People who spend long hours on the motorcycle and for whom neck fatigue, ventilation, and protection are a priority.
Those Who Value Lightness Above All Else: For those who prioritize weight reduction to maximize comfort on extended trips.
C. The Justified Investment
The cost of the KLIM KRIOS PRO is justified by the technology, materials, and meticulous design and manufacturing process involved. You're not just buying a helmet; you're investing in a piece of equipment that has been optimized to offer maximum protection and a superior riding experience, minimizing distractions and fatigue. It's a helmet that can make a tangible difference in the enjoyment and safety of every adventure.
D. Looking to the Future
The KRIOS PRO has set a very high bar. With constantly evolving safety standards (such as ECE 22.06) and the development of new materials, it will be fascinating to see how KLIM continues to innovate and improve this already impressive platform. For now, the KLIM KRIOS PRO remains one of the most advanced, lightweight, and safest options available for adventure riders.
Ultimately, the KLIM KRIOS PRO transcends the simple helmet category to become an extension of the rider, an essential tool that not only protects the head but also enhances the overall adventure riding experience. It's an investment in comfort, safety, and the pure joy of exploring less-traveled paths with the confidence of having the best equipment.
Un curso de moto trail en España es la clave para aprender a manejar tu maxitrail fuera del asfalto con seguridad y confianza. En esta guía descubrirás los diferentes niveles (iniciación, intermedio y avanzado), precios, técnicas que aprenderás, el equipamiento necesario y las mejores escuelas para formarte. Tanto si eres principiante como si ya tienes experiencia, encontrarás el curso perfecto para llevar tu moto al siguiente nivel y prepararte para grandes aventuras.
Evitar lesiones en la conducción Trail es posible con preparación física, técnica de pilotaje y equipamiento adecuado. En esta guía completa descubrirás cuáles son las lesiones más comunes en el Trail y cómo prevenirlas con consejos prácticos, ajustes de la moto, hábitos de hidratación y mentalidad correcta para disfrutar de cada ruta con seguridad y confianza.
Explora los Balcanes en moto con esta guía detallada: carreteras épicas como la Magistrala en Croacia, el Durmitor en Montenegro o la SH20 en Albania; ciudades históricas como Dubrovnik, Sarajevo o Kotor; y la hospitalidad única de una región aún salvaje. Consejos, rutas y experiencias para que tu aventura sea legendaria.
Cogimos el curso de regalo para nuestro hijo de 7 años. Y Tras la realización nos ha indicado que, ojalá poder volver y realizar el curso avanzado. Ha quedado contentisimo, mil gracias a Jose el instructor y Ricky tambien, por hacer tan ameno el curso. Son super atentos y cercanos con los niños. Nos hemos quedado con ganas de mas.
¡HASTA LA PRÒXIMA!
El curso one to one con Monje es una maravilla. Sabe sacar lo mejor de cada piloto y consigue que al final de la jornada se consigas hacer cosas que no pensaban jamás. Muy pero que muy recomendable.
Clase personalizada, entretenida y muy didáctica, ya que casa explicación iba razonada. Un espectáculo de cursos.
He comprado este curso basandome en las reseñas e incluso he conducido desde Valencia para poder tomarlo. Ha valido cada euro y kilometro hecho. Monje es el mejor instructor con el que te puede topar, cada cosa que indica viene con una explicación detallada del porque hacerlo y como. He aprendido mucho mas de lo que esperaba, me he quitado todos los miedos, bloqueos mentales e inseguridades. Ahora solo queda practicar hasta alcanzar el nivel requerido para poder tomar el siguiente nivel. Muchas gracias, Monje!
Fuimos con un grupo de amigos, y cada uno tiene su nivel.
Monje ha estado con cada uno de nosotros y todos hemos salido del curso con más confianza y tecnicas de conducción .
100% recomendable